Your cart is empty.
Your cart is empty.The structure, dimensional mounting accuracy and rotation accuracy of English tapered roller bearings are different from those of metric bearings. Usually used for machinery or imported industries with special requirements, external dimensions and tolerances are expressed in imperial units, suitable for equipment with imperial dimensions (usually in inches). For example, UK tapered roller bearings refer to tapered roller bearings with external dimensions measured in inches, originating in the UK and the United States. Its structural types also include single row, double row, four row, etc., and its working performance is the same as the corresponding metric tapered roller bearings. British bearings represent the external dimensions and tolerances of bearings in British units and are suitable for equipment with British dimensions. British bearings are suitable for various British sizes of industrial machinery, small rotating machinery, etc. The structure, dimensional mounting accuracy and rotation accuracy of English tapered roller bearings are different from those of metric bearings. Mainly used in industries with imported machinery or special needs. Correspondingly, the inner and outer rings of metric tapered roller bearings have tapered raceways, with tapered rollers installed between the raceways. If the tapered surface extends, it will eventually converge at a point on the bearing axis. Tapered roller bearings are mainly used to support combined radial and axial loads, mainly composed of radial loads. The axial load capacity of a bearing is determined by the contact angle, and the higher the contact angle, the greater the axial bearing capacity. Tapered roller bearing is a separable bearing, with an inner ring composed of rollers and a cage, which can be installed separately from the outer ring. This type of bearing may limit axial displacement on one side of the shaft or housing, and does not allow the shaft to tilt relative to the housing hole. Under the action of radial loading, additional axial force will be generated. Therefore, generally speaking, on the two supports of a bearing, the outer and inner rings of the bearing must be installed relative to each end face. The main uses of this bearing type are: automobile front and rear wheels, transmissions, differentials, small gear shafts, machine tool spindles, construction machinery, large agricultural machinery, railway vehicle gear reducers and small rolled neck reducers
$36.06
$ 17 .99 $17.99
$105.84
$ 49 .67 $49.67