Your cart is empty.
Your cart is empty. Note: Before purchasing, please note that the battery size and plug are suitable for your RC device with Molex plug.
This battery is compatible with most of the RC engineering cars, drift cars, trucks, off-road vehicles, remote control cars, high speed climbing cars, remote control boats.
Only the voltage, size and plug match, can be installed
Battery information:
Battery Voltage: 3.7V
Battery Configuration: 1S
Battery capacity: 3000mAh
Discharge rate: 15C
Battery weight: 48g/1PCS
Battery size: 2.60*0.71in
Discharge connector: Molex plug
Charging connector: Molex plug
Charger introduction
Product name: 3.7V USB smart charger (1 drag 5 charger)
Input parameters: DC 5V 2-3A
Output parameters: DC 3.7V 500mA
Plug model: 2-pin balance charger plug
Rechargeable battery: 1S 3.7V lithium battery Li-PO/Li-ion
Charging instructions: charging cable connected to the power supply, access to the battery charging, the red charging indicator light is always on, fully charged red light off.
Battery precautions:
1. Turn off the device when the battery is low to avoid deep discharge.
2. always disconnect the battery from the device when not in use.
3. Do not use or charge the battery if it is gassed, swollen, leaking, overheated or any other abnormalities
4. Never disassemble, puncture, shock or damage the battery. Do not ignite the battery.
5. Do not overcharge the battery. Improper use, such as short-circuiting or overcharging, may result in explosion or fire.