12V 100Ah LiFePO4 Lithium Battery, Group 24 Lithium Battery Up to 15000 Deep Cycles, Built-in 100A BMS,10 Years Lifetime for RV, Boat Marine Trolling Motor Camping
$230.16
$230.16
$
71
.28
$71.28
About this item
- 【 5 YEARS GUARANTEE& 10 YEARS LIFESPAN】 12.8V LiFePO4 mini lithium battery provides deep cycles. 4000 time cycles at 100% DOD, 6000 time cycles at 80% DOD, 15000 Time Cycles at 60% DOD, ensuring a minimum ten-year lifespan. LiFePO4 cells offers higher energy density and a lightweight, making the batteries downweight to 22lbs, only 1/3 of a 12V 100Ah lead acid battery.
- 【ENERGY EXPANSION & WIDELY USED】 The Hysincere 12.8V 100Ah LiFePO4 battery supports 4P4S ( 4 in series or 4 in parelle) for larger capacity. To acheive Max 400Ah capacity or Max 48V(51.2V) voltage, max. 20.48kWh load power. Widely used in most areas such as RV, Solar, Household Battery, Off-Grid and Electric Scooter, Electric Handicap, Camping, Marine, Home energy storage, Computer power backup, solar panel and so on.
- 【UPGRADE BMS SYSTEM】Our trolling motor battery has built-in 100A BMS (Battery Management System) to protect it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. Offering you a powerful and stable power supply. Notes: Please do not charge the battery at 32°F（0℃）or below, it can well discharge at low temp environment from -4°F To 140°F.
- 【BCI Group 24 Size, Universal Fit】12.8V LiFePO4 mini lithium battery with perfect Group 24 Size to replace 12v 100ah lead acid battery, support 4S4P connection to exspand the 'VOLTAGE' and 'CAPACITY'. HYSINCERE 'GROUP 24' mini lithium battery is a mere 8.46x8.07x5.12 inches (21.5x20.5x13cm) and weighs only 22 lbs (10.02kg), and it is perfect for BCI Group 24 battery box. Our battery boasts a compact form factor that maximizes energy density and fits for all types of vehicles on the market.
- 【Warm Tips】① This Battery is an energy storage battery rather than a start-up battery, we do not advise using it to start engines or golf carts. ② Please make sure the TERMINALS installed sturdy and keep their thickness is less than 2mm to prevent loosening or overheating. The same precaustion applies when using clamps.
