Your cart is empty.
Your cart is empty. 1 Ton Arbor Press with Ratchet Leverage
Iron Construction & 1 Ton
This metal stamping press is constructed of high strength cast iron, integral moulding, allowing for the rugged strength needed for tougher jobs, delivering 1 ton of pressure. It features good resistance to corrosion and rust.
Ratcheted Lever with Handwheel
Easy to operate this hard drive destroyer by a steel ratcheted lever with rubberized caps covered in the end of it, non-slip and safe. Equipped with a hand wheel to perform light and quick press work. Energy saving.
Ram with Pinions
Ram dimensions: 0.98 x 0.98 x 9.1in. Iron ram is heat treated and the pinions are even, solid, durable and anti-wear. With the aid of a magnetic insert, punches or tools can be added to the end of the ram.
4 Fixed Holes Plate
The mental press is equipped with a slotted table plate with 4 fixed holes. Plate diameter: 3.54in/90mm. The arbor press plate can be replaced or rotated to one of its 4 openings.
Solid & Thickened Base
This manual press is designed with solid base which is pre-drilled with 2 holes for mounting, making this compact and small press have a great balance and keep sturdy.
Wide Application
This hard drive shredder is a common tool for factory workshop, mainly used to press the bearing and the work piece with hard fitting. Perfect for assembly and repair fields.
Specifications
Capacity: 1 Ton
Type: Ratcheted
Material: Cast Iron
Max. Work Height: 4.33in/110mm
Ram Dimensions: 0.98 x 0.98 x 9.1in/25 x 25 x230mm
Plate Diameter: 3.54in/90mm
Throat Depth: 3.82in/97mm
Overall Size: 9.4 x 10.7 x 13.5in/24.1 x 27.2 x 34.5cm
Weight: 28lbs/12.4kg
Package content
1 x 1 Ton Arbor Press
1 x Kit of Accessories
Customer
Reviewed in Canada on May 17, 2024
The write-up for this item is totally misleading it is in no way a ratcheting press
Roughout
Reviewed in the United States on April 2, 2024
I might buy a way to measure the press pressure. I don't think it presses 3 ton.
FRANCINE CRITES
Reviewed in Canada on September 22, 2023
C’est très bien. Arrivée super rapide merci.
mrmagoo1
Reviewed in the United States on October 23, 2023
This tool is very sturdy & quality made. But .. evidently the tool I am looking for to cut 1/2" holes into bottle caps does not existence and I cannot find a cutting die that will fit the standard sized hole in this press. I was hoping this would solve my problem but unfortunately not. Totally not the manufacturer's fault. Thank you seller for all your help.
Yvan Rossignol
Reviewed in Canada on September 15, 2022
je pensais que c'était plus gros que ca
JW
Reviewed in the United States on June 7, 2021
The 2 ton press I ordered did come with the ratcheting lever as advertised. Works pretty well and is similar quality to Harbor Freight or Grizzly but cheaper.
Kristy
Reviewed in the United States on November 29, 2021
I’m very new with this type of machine, I’m not even sure what a ratchet means lol. So, with the bad reviews saying there was no ratchet, I wasn’t sure what to look for?? .. but regardless this worked perfect for what I needed.It did came with a busted cap that’s on the screw where you use it to hold the lever in place, but that was it. Was very easy to figure out. Happy to snatch it while I could before it was sold out! :)Perfect for my sewing/crating hobby !
Aaron Wojnowski
Reviewed in Canada on October 6, 2021
Arrived clearly used and broken, even had a sticky note on it saying “sioc failed”. Covered in dirt and rust. Super annoying as a customer as I now have to take up my time to return this item.
Kristen F.
Reviewed in Canada on October 2, 2021
While I understand this is a tool and designed to be functional all the paint looks like it was slapped on with a bucket - it is uneven has bubbles in places and flakes off - disappointing to buy something brand new and know you will have to strip and repaint it
Timothy Paul
Reviewed in the United States on August 11, 2020
Packaged &crated and arrived intact. That’s a big deal because I ordered another one from a different seller and it just never arrived intact. After three tries from UPS ground, I gave up and ordered this one. This was sent FedEx and arrived in 3 days.All and all it’s a nice unit. Like most lower cost cast iron Chinese / Indian tools, I did have to disassemble and reassemble it. Tuned it up a bit. But in all honesty it was pretty clean inside. Not as much sand left over from the sand casting process as I have seen in many Chinese tools. Tuned up the pawl/ gear contacting points. Drilled small recesses in the (pinion)arbor gear /spindle to accept the two set screws that are holding the locking collar on so that the set screws hold more securely. All in all I’m very happy.As part of the tuning up, I milled a Delrin pad to contact the ram’s two front adjusting ram screws. This allows me to adjust the ram so that it stays put once I am raising or lowering the ram. The DRAKE presses have a hand wheel screw which locks the pinion and therefore does the same thing as this Delrin pad. The two screws already there can do the same thing but the large contact area of the delrin really gives consistent pressure against the ram. I can set the ram to any position now and it doesn't fall down. The hand wheel easily moves the ram when needed. And the other reason I did this is I did not like the steel to steel contact of the screws alone.All and all, the castings are well made and the fit and finish is above average. My only real complaint is I feel that the bolts are a very poor fit. The holes tapped into the mill are an incredibly loose fit. I was almost going to drill and retap them a larger size. I even checked the holes with known good new metric bolts but the bolts are not the problem. The problem is they just tapped these threads too loose. Probably done on a mal-adjusted CNC thread mill. I decided to leave them alone. If they ever strip out, that’s when I’ll install Heli-coils.But like I said, I’m happy with the press. All and all it’s a well made press which should serve me well. If I was a production shop, I’d buy a Drake. But I’m just a hobbyist. So it will most likely last my lifetime and my sons lifetime.
Recommended Products
