Shopping Cart

Your cart is empty.

Your cart is empty.

Bilge Pump Hose Plumbing Kit Thru Hull Fitting 1‑1/8in Dia 6.6ft Long PVC Hose Clamp Fit for Boat

4.7 (2) Write Review
Free shipping on orders over $29.99

$21.59

$ 11 .51 $11.51

In Stock

About this item

  • PVC Tubing: The sealed heavy duty bilge pump discharge pipe is made of lightweight and flexible PVC, providing maximum oil, solvent, chemical and sunlight
  • Construction: Corrugated, anti kink construction and extremely small bend radius ensure maximum durability and maintain steady flow.
  • Functional Kit: This kit is one of the functional boat accessories that allows you to remove accumulated water from the bilge and it can work with a bilge pump float switch.
  • Easy To Use: This kit contains all the essential parts and equipment needed to perform pumping tasks, making it one of the best marine boat accessories and easy to use.
  • Package Contents: The kit includes 1pc 6.6ft / 2m of 1‑1/8in ID (inner diameter) hose, 2pcs stainless steel gear hose clamps, and 1 through hull connector.


Product Description

1619220083211-1

Bilge Pump Hose Plumbing Kit Thru Hull Fitting 1?1/8in Dia 6.6ft Long PVC Hose Clamp Fit for Boat

YT

Easy To Use: This kit contains all the essential parts and equipment needed to perform pumping tasks, making it one of the best marine boat accessories and easy to use.

Functional Kit: This kit is one of the functional boat accessories that allows you to remove accumulated water from the bilge and it can work with a bilge pump float switch.

Package Contents: The kit includes 1pc 6.6ft / 2m of 1‑1/8in ID (inner diameter) hose, 2pcs stainless steel worm gear hose clamps, and 1 through hull connector.

1

1619220083211-2

1619220083211-3

1

1619220083211-2

1619220083211-3

1. PVC Tubing: The sealed heavy duty bilge pump discharge pipe is made of lightweight and flexible PVC, providing maximum oil, solvent, chemical and sunlight resistance.

2. Durable Construction: Corrugated, anti kink construction and extremely small bend radius ensure maximum durability and maintain steady flow.

3. Functional Kit: This kit is one of the functional boat accessories that allows you to remove accumulated water from the bilge and it can work with a bilge pump float switch.

4. Easy To Use: This kit contains all the essential parts and equipment needed to perform pumping tasks, making it one of the best marine boat accessories and easy to use.

5. Package Contents: The kit includes 1pc 6.6ft / 2m of 1‑1/8in ID (inner diameter) hose, 2pcs stainless steel worm gear hose clamps, and 1 through hull connector.

Specification:

Item Type: Hose Bilge Pump Installation Kit

Material: ABS+PVC+stainless steel

Kit Includes: 1pc 6.6ft / 2m 1-1/8in / 29mm ID (inside diameter) PVC hose, 2pcs stainless steel worm gear hose clamps, 1pc 1-1/8in thru hull connector

Application: One of the functional boat accessories that allows you to remove standing water from the bilge, this kit contains everything you need to install a bilge pump.

Package List:

1 xPVC Hose

2 x Clamp

1 x Thru Hull Connector

Note:

Please verify your bilge pump outlet size before purchasing, only for 1‑1/8in OD pump outlets. Not suitable for through hull connections below the waterline.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.


F150 Guy
December 12, 2024
This kit has everything you need to repair or replace a bilge pump setup. I actually was able to do 2 jobs with this. I have a sink in my boat and we've been trying to trace a slow leak in the boat. I couldn't figure out where it was. Turns out the sink drain hose had a crack. So we were getting some water coming in. That hose was 5 feet long and I used this hose to replace that old one.I wanted to replace the old bilge pump hose as well and this hose was long enough to do both jobs. I reused a couple clamps and also used the ones included and everything worked perfectly. I also replaced the old thru-hull fitting with this new one and everything it tight and leak free. Very happy with the product.
Vey
November 15, 2024
Well made and good plastic. Fitting is standard marelon size and quality. This hose is light and very pliable and can be placed in many ways. It is excellent for up to 24 feet long boats or cruisers. It is not long enough for longer installation but it should be noted that the bilge hose goes from the lowest part of the boat / bilge via shortest route to the hull side of the boat. For most boats 6 feet should work but some boats require longer hose. Hose fittings on both sides are ok.Package comes with all clams etc to complete installation.If you have an old disintegrated hose and sun-bleached through the hull this is the kit for you. All is included and installation can be completed with basic tools.