Excellent tool, doesn't have massive torque to undo bolts but works very well once bolts are cracked.Seems to have good battery life so far.Easy to use just pull the trigger and it goes, speed controllable by not pulling trigger all the way.Feels solid, I hope it lasts.

Very powerful I’m happy with my purchaseGoing to buy couple more for my house and my car toolbox 100% recommend

Haven't use yet, but it appears and feels like a good quality product made of good material.

Tool is heavier than expected. First use it would not break loose a larger size nut and had to use an air wrench on it. Second use, it was great. Was a breeze to remove and reinstall bolts on a motor cover and power box.

So I tested the tool on a variety of bolts, and can verify that the tool has a definite issue with both break away and tightening of bolts that are already tightened to a degree. This is because for some reason the motor will not attempt to turn from a stopped position for very long after pressing the switch. When trying to loosen or further tighten a tight bolt, the motor and equipped light will turn on for a split second, then off for a second then back on for a split second. this will repeat and you wont get anywhere.Either the battery is too weak and cannot provide the amperage for the advertised torque, or they chose the wrong motor for the device. Could also be a duty cycle safety to prevent the motor from burning out, but it prevents the tool from doing as advertised. In any case, with the way it operates the tool would not be sufficient to break free bolts not even anywhere near 65ft pounds of tightness from hard to reach spots.I have a feeling the advertised torque is not for break away at all, and is instead considering starting the bolt loose and letting tightening it until the motor stops on its own for motor protection. It will eventually be left to the old method of trying to work a standard ratchet and a cheater bar in, since this till might be too bulky to take the place of that setup.I'm considering sending this back for a refund. While not having to attach an air hose is convenient, both of my air ratchets can both break away and tighten already tightened bolts just fine. I was pretty skeptical about getting a cordless ratchet in the first place, and if this is what I can expect from one of the higher priced ones, I would rather just settle with a smaller, lighter cheapo that doesn't even have variable speed and a lower tightening torque.ADDITIONAL:So I thought maybe I just got a bad one, so sent it back for a replacement. Unfortunately, the new one does exactly the same thing. The motor does not work well turning bolts that offer I would say more than 35ft lbs of resistance for loosening or while turning. I tried on a caliper bracket bolt that had thread lock applied, and it kept cutting off before operating even 1 second. I took my air ratchet which is rated at 70 ft lbs, and while it also struggled, it did not continuously stop after it had already started turning, and is strong enough to break my wrist if I'm not careful. Thats what I expect of something rated at 65 ft lbs, but this tool wont even budge on a tightened fastener. To be fair, thread locked fasteners do tend to tighten if they are turned too fast, but still, the motor does not even try or have the power to do so. But on the same job, the tool could not break free the slide pin bolts, which were 32ft lbs, no thread lock.For what it CAN do, it should be priced less to do it. Not really worth $140, and its not suitable for any heavy duty job as its advertisement suggests. If I ever need to break a bolt free from a position where I cant hand-ratchet with this tool, it has already failed me and made me resort to normal hand tools and suffering.EDIT 2:I tried to justify using it in various situations, but the motor has constantly failed me. It couldn't even break away a small car's oil pan bolts. I had to fall back on my 1/4" air ratchet, which is advertised at 35ft lbs! It works as advertised in both directions, while this electric thing doesn't get anywhere near 35 ft lbs. They need to stop advertising this as heavy duty, as its just heavy and that's it.