Your cart is empty.
Your cart is empty. Description:
Suitable: fits for host case which CD-ROM Slot InWall is flat, or bracket installation type CD-ROM Slot.
Durable material: made of stainless steel material, durable and sturdy, withdetachable design.
Detachable design: it can be splitted, let you experience the fun of DIY, convenient to storage.
Convenient to use: with 1x 12cm cooling fan install slot space, hard drive cage adapter tray rack bracket.
Package includes: 1 PC x hard drive cage, 1 PC x mounting screw pack, 1 PC x screwdriver (random color), 1 PC x manual, 10 Pcs X guide rail.
Note:
1. Some PC Chassis special design may not support this hard drive rack.
2. The incoming goods are not well installed. You need to install them by ourselves according to the manual.
Specifications:
Product name: hard drive cage
Material:galvanized steel plate +ABS plastic
Color: silver
Feature: detachable
Size(approx.):(L x W x H)16.6 x 14.6 x 12.8cm/6.54 x 5.75 x 5.04inch
Package size(approx.): 16.6 x 14.8 x 5.5cm/6.54 x 5.83 x 2.17inch
Package Includes:
1 PC x Hard Drive Cage
1 PC x Mounting Screw Pack
1 PC x Screwdriver (Random Color)
1 PC x Manual
10 Pcs x Guide Rail
Note: Only suitable for 3.5inch hard drives.
arik
Reviewed in the United States on December 16, 2024
Everything is good except that the spaces between the discs are so small that there is no good air flow between the discs and they get hot even though there is a 120 mm fan
Customer
Reviewed in the United States on January 3, 2024
extremely small screws, hard to put together, the included screwdriver is worthless, can not magnetize it, too small.UPDATE.....reversed top and bottom plates now works as it should. Was initially following the arrows stamped on side plate and top and bottom plates to match which resulted in not being able to mount fan cage on correct end, them arrows now contradict yet is positioned right to function as it should. Criticism of the screwdriver which cannot be magnetized and tiny screws stands. Good value for what it is
wingzero
Reviewed in the United States on July 7, 2023
Build quality is alright. It's not flimsy by any means.I'd be careful with the plastic retainers for 3.5" slot they may break if you're not carefulI used 2.5" to 3.5" trays (ordered separately) and mounting hardware from this kit for my U.2 SSDsI did hear click when I inserted the tray into the bays of the cage.A 120mm fan can be mounted on front of the cage for cooling.Test:I had the U.2 drives stacked on top of each other with a burst of air from front intake fans.The drives still got pretty hot. Below were the temps,/dev/nvme9n1 57 C/dev/nvme10n1 61 C/dev/nvme11n1 64 C/dev/nvme17n1 56 CAfter the cage with a Delta 120mm x 25mm fan, the temps dropped by 10C/dev/nvme9n1 48 C/dev/nvme10n1 50 C/dev/nvme11n1 49 C/dev/nvme17n1 36 CRecommended.
Slipsyde
Reviewed in the United States on December 15, 2023
Worked perfectly to add 3.5 bays to my nas case that has alot of 5.25 bays
Tony U
Reviewed in the United States on November 16, 2023
Just assembled as pictured, very easy. Hard drives seem to fit perfectly with just enough gap to let air pass over the drives. I need to get 8 drives into a Corsair 200R and this made that possible without spending $100-200 on a hot swap bay.
Recommended Products
$25.20
$ 10 .79 $10.79