Your cart is empty.
Your cart is empty.
Specifications For
●Amps:6.7A
●Volts:DC 12V(9-14.4V)
●Flow: 0.1-6.5 L/MIN
●Ratedpower: 80W
●Pressure : 80-130 PSI, MAX 130PSI. .
●Inlet/Outlet: 3/8 inch (10mm) hose barb
●Product Size approx: Length 160mm x Width 100mm x Height 60mm
●Flow capacity: 1.7 Gallons per minute (6.5 Litres per minute)
12V Water Pressure Diaphragm Pump by Finderomend
✿Rubber Feet:Durable rubber feet for reducing vibration and noise;The pump work efficient, very low current draw and offer high capacity output Self priming Smooth.
✿Easy connecting system Low power draw Soft rubber mounts Professional grade pump.
✿ Built-in automatically pressure switch, when it stop yielding water, it will automatically cut off the power supply, the motor stops.
✿Widely used in general industry equipment, medical equipment, chemical equipment, farming (lawn and garden), tour vehicles, special vehicle, ship, beverage, vehicle cleaning, carpet cleaning, ground cleaning, water purification and water treatment equipment.
Attention Please
❤The motor pump can be splashed onto a small amount of water (need) clean after use, can not be directly to the water pump motor, it is strictly prohibited to pump motor to soak in the water.
❤Built-in automatically pressure switch, when it stop yielding water, it will automatically cut off the power supply, the motor stops.
❤The pump pressure adjustment screw can be adjusted freely. Before delivery pressure is adjusted, if large pump pressure, easy to suppress the burst pipe.
❤ Do not use temperature more than 60 ° high temperature water or dirty water (in dirty water sicken hundreds of mud sand can cause unrecoverable damage to the pump).