Your cart is empty.
Your cart is empty.The Forney 30305 6013 Mild Steel superweld Welding Rod is a mild steel, all-position general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. 3/32-Inch ie.2.38 mm rod diameter. 5-Pound ie.2.26 kg. 6013 Tensile strength is 60,000 PSI Amperage 40-80 amps AC, DCEN, DCEP Either Polarity. Typical Spec Example E6011: E is for electrode. The next two numbers ie.60, 70 or 80 indicates the tensile strength of the rod for example 60,000. The third number tells the welding position; ie.1=All position ie.2=Flat or Horizontal position ie.4=Flat, Horizontal, Overhead and Vertical Down position. The fourth number indicates the type of current to be used and coating of the rod; ie.0=Cellulose Sodium, with deep penetration, use Direct Current Electrode Positive ie.1=Cellulose Potassium, with deep penetration, use AC or Direct Current Electrode Positive, or Direct Current Electrode Negative ie.3=Titania Potassium, with light penetration, use AC or Direct Current Electrode Positive ie.8=Low Hydrogen, Iron Powder, with medium penetration use AC or Direct Current Electrode Positive. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.
Billyjack84
Reviewed in the United States on March 7, 2025
Finally I have found affordable electrodes that perform as they should.
Daniel
Reviewed in the United States on March 6, 2025
Great rods, easy to learn on, no problems at all they work great
NAIF HAMZI
Reviewed in Saudi Arabia on April 2, 2025
زبدة ماهو لحام احسن وانظف اسياخ لحام مرت علي
Andy
Reviewed in the United States on February 9, 2024
These rods are great 6013 is a easy rod to strike up considering stick welding but it is easy to get porosity with these rods but that is a issue with 6013 in general not this rod particularly
Marco R.
Reviewed in Canada on February 24, 2024
De Bonnes qualités
alain therrien
Reviewed in Canada on October 10, 2024
fait un peu trop de flokce...
TL
Reviewed in Canada on January 14, 2024
Soude bien
Boss
Reviewed in Canada on June 6, 2023
Great welds, a bit of slag but works great.First time stick welding on a cut off piece and very happy for the price
Liam Cooper
Reviewed in Canada on May 29, 2023
6013 is my best welding rod and Fourney makes real good ones.
Bug's
Reviewed in Canada on January 24, 2023
So Far So Good... At least not Broken like ive Read Some Peoples Are When they Arrive... But i Can See How they Could Get Broke In Delivery... Because there Heavy and kind a Loose in the Container there In........
Andre Baril
Reviewed in Canada on October 25, 2021
Hard to beat at 17$ for 5lbs of 6013 rods. Not the most praised type of rods, but they get the job done, easy to strike an arc (and maintain it) and the slag is somewhat easy to peal. Best bangs for the bucks.
justin
Reviewed in Canada on February 1, 2020
Not bad, really long though. Can cut them in half for easier positioning. Brown instead of the grey I'm used to. Holds a good arc but sometimes hard to strike
paul norseman
Reviewed in the United States on July 7, 2019
Probably the most useful electrodes ive ever purchased. I do a lot welding on thin tube mild steel that is usually slightly rusty or covered in millscale. It cuts through this with ease which is a huge benefit in prep time. Thin mild steel tubing is structurally solid, cheap but some of the most frustrating material to weld. With .060 wall thickness tube, its almost impossible not to blow through the work piece. I found these rods to be the most forgiving in this aspect while still fully penetrating. I can also make significantly longer welds without allowing the piece to cool. Running them on non-digital welder so cant tell you exact amps but its between 58 and 63. I can also leave these in my tool box for weeks and they run as good as new. No moisture sensitivity or storage limitations.
Recommended Products
