Your cart is empty.
Your cart is empty.Amazon.ca Product Description
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
From the Manufacturer
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
Biff44
Reviewed in the United States on June 25, 2023
these work so much better than finishing nails!
J.P.
Reviewed in Canada on June 24, 2019
Belle finition pour un plancher de composite une fois vissé il suffit de frapper avec un marteau pour remplir le trou fait par la vis avec le surplus de composite qui revient à la surface.Très bon produit
John Reagan
Reviewed in the United States on October 15, 2019
These screws were great for fixing some stools. The small head is discreet, and the self-tapping feature was great.
MazH
Reviewed in the United Kingdom on June 13, 2018
Ive gone on to order 4 further packets of these trim screws. They're amazing. They glide into the wood without any danger of splitting even very close to the edge or with narrow pieces such as plywood. They drive deep into the wood with ease if that's what you want and they're so neat and because of the small head it is very easy to conceal the hole with wood filler. They come with the correct bit to drive them in too. They are an absolute joy to work with and I would highly recommend them to anyone working with wood.
Peter G. Buckley
Reviewed in the United States on February 1, 2015
I had to reinstall about 100 linear foot of baseboard trying to reuse the old nail holes to minimze the painting prep job. These finish screws were excellent. With the star drive and a good drill you feel completely in control....nor splintering, no tare through
James May
Reviewed in the United States on May 15, 2014
I am using these 2 inch as well as the 1-1/2, 2-1/2 and 3-1/8 inch screws on my project rebuilding the stairs in my circa 1915 home. I have yet to find a single malformed screw or have one that is hard to start or have one strip out. In addition they are easy to drive and control the depth because of the torx head drive. They make a very small hole which can be filled with a small ball of non-hardening filler. What more could I ask? Definitely recommended.
Recommended Products
$32.16
$ 17 .27 $17.27