Your cart is empty.
Your cart is empty.This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Stephen Cherney
July 17, 2025
fit was good. 1 cable was a bit to long may cause a problem later on not sure.
Kwhip
July 2, 2025
It sucked nothing lined up had to drill new holes in the door to get the bolts that are pressed to the track thru so it could be install to workNever buying from them again
John Ferguson
June 4, 2025
Bought this for my sons ‘07 Escape drivers window! Perfect fit and works great
Me salió dañado el. Chicote
May 5, 2025
Está dañado el producto no lo pude usar
Ric P.
March 8, 2025
First off I haven't done door work on a car in decades.2001 Ford Escape passenger rear window cable broken.Watched a video on removal and replacement twice and headed out.Needed Supplies:10mm Socket, medium Phillips and very small Flathead screwdrivers, Gorilla Tape (water guard glue was brittle after 16 years so I taped guard back on), Blue Tape to hold window up during replacement, 3 ea. 6x10mm nutsTook about an hour and that was because I was REALLY Careful.Tip... if you don't have 6x10mm nuts hanging around.... you can break off the old ones in the original unit and bench grind down to about 1/4" thickness... took 10 minutes.Replacement went smoothly and I can probably to it in a half hour now.Cycle the window a few times to get the stiffness out of it.
Joe Baker
February 5, 2025
Great fit, of course it works, kinda nice thing to have.Be aware the mounting bolts for the motor are replaced with studs. You will need three nuts to fit the studs. Studs are by far easier to mount the motor with.When you use the three nut's, don't freak out when you check to see if you put everything together and used up all your nuts and bolts. You will have three bolts left over. If ya don't remember the bolts were replaced by studs... How can I have extra part's... Ten min later, DOH! 🤪
D. S.
October 24, 2024
Great fit for my 2002 Ford Escape. I had read reviews mentioning missing nuts and had already made a run to Home Depot to purchase the missing hardware so I was ready but there was no need, the kit came with the nuts I thought I would need which is great and a sign the seller listened to the reviews and corrected 👍. This was an easy straightforward replacement and a perfect fit. I had no issues whatsoever and am very pleased with this particular item and seller.
Recommended Products