Shopping Cart

Your cart is empty.

Your cart is empty.

PROSHI 1/4-Inch 90-Degree Angle Air Die Grinder, 0.32 HP, 20,000 RPM, Black Aluminum, Edge Series

4.4 (13) Write Review
Free shipping on orders over $29.99

$24.53

$ 12 .23 $12.23

In Stock

About this item

  • Compact and lightweight design for easy maneuverability lock-off throttle to prevent accidental startup 90-degree angle head allows flexibility in tight quarters.
  • Angle die grinder is equipped with 0.32 HP motor and can work with a maximum speed of 20,000 RPM. pneumatic angle die grinder features a built-in speed regulator for better control.
  • The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.
  • Lightweight aluminum body, Rear exhaust, Durable ball-bearing motor.
  • Suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, engraving.


Product Description

1/4-inches air angle die grinder with rubber sleeve feature:

  • The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.
  • Variable-speed throttle ramps up to maximum RPM, Built-in air regulator for precise speed control.
  • Lightweight aluminum body, Rear exhaust, Durable ball-bearing motor.
  • The sealed ball-bearing design keeps out contaminants promoting smooth operation.
  • Suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, engraving.
  • Stepless speed control knob switch: According to different purposes, choose different speeds to meet different needs
  • Air inlet and exhaust port: air inlet filter design, effectively filter air impurities, humanized annular exhaust design.
  • Industrial grade 1/4" chuck: high concentricity, small yaw, low vibration, high wear resistance, no heat, stable operation.
  • Plate-type start-stop switch: safe pressure plate type start-stop switch, more reliable and more reliable.
  • 1/4" (6.35mm) high-precision collet: high-temperature carburizing, adapt to greater impact strength, precision CNC lathe processing, not easy to deform, bolt. specifications: M6

1/4-inches air angle die grinder with rubber sleeve technical specifications:

  • Collet size 1/4" (6.35mm).
  • No-load speed: 20000 RPM.
  • Air consumption: 2.8 CFM, 80L/min.
  • Pressure: 90 Psi.
  • Power: 0.6HP.
  • Air inlet specification: Air Inlet: 1/4" (American standard connector).
  • Product net weight: 0.49Kg.

What's in the Box:

  • PROSHI brand 1/4-inches air angle die grinder with rubber sleeve 1 pcs.
  • Wrench 2 pcs.
  • backup 1/8" (1.38mm) collet 1 pcs.
  • Instruction Manual 1 pcs.
  • American standard 1/4 NPT quick connector 1 pcs.

1/4-inches air angle die grinder with rubber sleeve technical specifications and dimensions

Edge Series Air Angle Die Grinder

Kindly reminder:

Before you use the air angle die grinder, please add 2-3 drops of oil from air quick connector and please allow the tool to run for a few seconds after filling to make sure it works well. (oiler not included in our box)

This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air, where the air hose is connected to the tool when the tool is running.

Different angle views for 1/4-inches air angle die grinder with rubber sleeve

Mini Air Angle Die Grinder

1/4-inches air angle die grinder with rubber sleeve full set of accessories

1 pcs collet size 1/4" (6.35mm) already installed in angle air die grinder. in the box include 1 pcs 1/4" NPT American standard quick connector and 2 pcs wrench. and 1 pcs added 1/8"(3.18mm) collet.

pneumatic angle die grinder

1/4-inches air angle die grinder with rubber sleeve side view

Industrial grade 1/4 inch collet, high concentricity, small swing, low vibration, high wear resistance, balanced operation.

90 degree angled air die grinder

1/4-inches air angle die grinder with rubber sleeve rear view

The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.

air angle die grinder

1/4-inches air angle die grinder with rubber sleeve rear view

Stepless speed control knob switch, according to different purposes, choose different speed. The platen type starts and stop switch is safer and more reliable.

More views for 1/4-inches air angle die grinder with rubber sleeve

mini air angle die grinder

1/4-inches air angle die grinder with rubber sleeve air inlet view

The air inlet has a filter to prevent foreign matter from entering, and the air inlet is also a pneumatic oil filler port.

pneumatic angle die grinder

1/4-inches air angle die grinder with rubber sleeve how to adjust the speed

Under normal circumstances, the factory air die grinder has adjusted the speed in the normal working application mode. If you have special requirements for speed, you can adjust the speed again with a screwdriver.

90 degree angled air die grinder

Collet or grinding head installing for 1/4-inches air angle die grinder with rubber sleeve

show how to install collet or grinding head for 1/4-Inches Angle air die grinder, the wrench is included in the sales package and the grinding head is not included.

1/8-Inches angle air die grinder

Instruction manual for 1/4-inches air angle die grinder with rubber sleeve

  • Please check off all tightening parts of the tools to be in good condition before operation.
  • Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
  • Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
  • Release the air supply when replacing Grinding head.
  • Wear protection glasses, eye protector, dust mask and gloves at operation.
  • Have a short break in every 30minutes to avoid any possible injury due to tiredness.
  • Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
  • Do not touch the rotating part of the tool with your hand or your body at operation.
angle air die grinder with rubber sleeve

Routine maintenance for 1/4-inches air angle die grinder with rubber sleeve

  • Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool.
  • Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
  • Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
  • Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
  • Do release the water out of the air compressor and air hose after an operation.
  • Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.

Alex Fig
Reviewed in the United States on January 26, 2025
Good quality works strong has good speed for the job.
joe
Reviewed in the United States on January 17, 2025
No more than what I use it for does what a pricier grinder would cost just use air tool oil and it should last a long time.
Customer
Reviewed in the United States on August 31, 2024
Have had this product for a year or so and still works well.
Betty Boop
Reviewed in the United Kingdom on October 5, 2024
Very happy with item
joachim
Reviewed in Canada on March 22, 2022
de bonne qualité et très satisfait
kobebryan
Reviewed in Canada on February 2, 2022
Not Good!
Serguei E.
Reviewed in Mexico on January 24, 2022
Es un buen maneral y cumple su cometido, tiene un buen agarre gracias a la manga de goma.
Maxime Bouchard
Reviewed in Canada on April 12, 2022
Good
Rakesh M.
Reviewed in Canada on September 14, 2021
Dont use itIt will b put you in big troubleWhile i was using it was broken frm the point of machine and disc hit my face luckily i was wear mask with Enc which is save me frm big injury
sylvain legros
Reviewed in Canada on July 19, 2021
bonne outils pour le prix
Robert
Reviewed in Canada on December 6, 2021
It seems let a decent quality, it is also quitter then I expected.
Bruce C
Reviewed in Canada on November 10, 2021
Happy with it. Delivered on time.Appears well made. Can’t attest to durability yet as haven’t used it enough yet.
Jacques
Reviewed in Canada on October 12, 2021
Bonne qualité
Recommended Products
Grinder Flange Angle Wrench Lock Nut, 7pcs Spanner Power Tool Kit 4.5 5 5/8‑11in for DW 193465‑4

$8.72

$ 4 .31 $4.31

4.3
Select Option
Cordless Angle Grinder Compatible with Makita 18V Battery, 125mm Brushless Cutting Grinding 6700 RPM 3 Position Adjustable Auxiliary Handle Great for Sanding Cutting, Grinding, Polishing (with Blade)

$43.19

$ 22 .31 $22.31

5.0
Select Option
Kadimendium Burnishing Attachment Burnisher 19×15×14 Angle Grinder Accessories Polishing Wheel Drawing Machine Multifunctional Interchange, KADIMENDIUM50XUTIOW6Y

$26.13

$ 12 .23 $12.23

4.4
Select Option
DEWALT (DCG413B) 20V XR Brushless 4.5' Angle Grinder, Baretool with (DCB205CK) 20V MAX 5.0 Ah Battery Charger Kit with Bag

$329.76

$ 71 .28 $71.28

4.6
Select Option
DeWalt OEM N134467 (2-PK) Replacement Angle Grinder hex Hole Flange DWE4222

$24.23

$ 11 .51 $11.51

4.4
Select Option
Bosch PROFACTOR 18V SPITFIRE GWS18V-13CN Cordless 5-6 In. Angle Grinder with BiTurbo Brushless Technology and Slide Switch, Battery Not Included

$165.59

$ 71 .28 $71.28

4.7
Select Option
Adapter for XLOCK Angle Grinder Cutting Blade Adapter Diamond Core Drill Bit Adapter 304 Stainless Steel Angle Grinder Cutting Blade Bit Angle Grinder Accessories (5/8-11)

$24.40

$ 11 .51 $11.51

4.7
Select Option
Twilight Garage 6PCS Strip Discs Stripping Wheel, 115mm 4.5 inch Poly Paint Removal Disc for Angle Grinder Clean and Remove Paint Coating Rust Welds Oxidation (4-1/2' x 7/8') - Blue

$18.71

$ 8 .63 $8.63

4.6
Select Option