Your cart is empty.
Your cart is empty.All ports on the 2.6 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multiswitch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss, and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.6 GHz splitters have a solid, sealed body for improved EMI/RFI performance. Standoff design allows cables to be routed behind the splitter for tight installations.Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes. For best system performance, choose a splitter with the minimum number of outputs for your application requirements. This minimizes attenuation/signal weakness to each of the ports and provides the strongest signal to each individual device. Install splitter as close as possible the devices receiving the split cables. This minimizes the length the split (attenuated) signal needs to travel. Use F-port terminator caps on all unused splitter and wallplate ports to minimize signal reflections. Splits 1 input signal into 2 balanced output signals Designed for use in High Definition applications: Satellite/Digital Cable TV 10 MHz to 2.6 GHz bandwidth All ports are power-pass,Max Pass Current: DC15V * 0.5A / AC30V * 1A Internal printed circuit board for improved electrical performance Nickel plated zinc construction EMI/RFI shielding effectiveness: >120dB For 75Ω coaxial cable systems
Leyanis García
Reviewed in the United States on June 2, 2025
Usé este splitter coaxial de 2 vías para dividir la señal de cable entre mi módem y la televisión, y hasta ahora ha funcionado sin problemas. La instalación fue muy fácil: solo tuve que conectar el cable de entrada en la parte de arriba (donde dice “IN”) y los dos cables de salida en los puertos “OUT”.La construcción del divisor se siente robusta, de metal, y los conectores ajustan firmemente. No noté pérdida de señal ni interferencias. La frecuencia que admite (hasta 2620 MHz) lo hace compatible con internet de alta velocidad y televisión digital.En general, me parece un buen producto, simple pero efectivo. Lo recomendaría si necesitas dividir la señal en casa sin complicaciones.
M/Y Amnesia
Reviewed in the United States on June 12, 2025
Does what it is supposed to do, splits a single line to 2 monitors.
Jeremy
Reviewed in the United States on June 12, 2025
No problem with this
Odi
Reviewed in the United States on May 31, 2025
Works very well fast and simple to switch out.
Michael Outen
Reviewed in the United States on May 17, 2025
Good
Recommended Products
