Your cart is empty.
Your cart is empty.Product Description
Introduction
Tuxing brand, the characters in the mark transliterate to "TU"and "XING" and this means"hiking on foot"in Chinese. So the English translation of the word "TUXING" in the mark is "hiking on foot"
Tuxing aims at to provide outdoor products for hunting and diving field products. The mark consists of two tools that are crossed on the top of a perpendicular bar with an angle on the end above the word "TUXING" make it more stable. Like the anchor to protect the outdoor acitivies safer and practicality wherever the environment you are.
Tuxing, make your outdoor activities easier.
Specification
Model : TXED011/TXED012/TXED013
Net weight : 32 KG （110V）/ 32.55KG ( 220V）
Power rating : 2200W
Cooling system : water and fan cooling
Noise : 72DB
Size : 530mm×400mm×480mm
Power voltage : 110V / 220V
Compression Stage : Two stage
Lubrication Mode : Splash Type
Inflating Speed : 2800R/MIN
TXED011 pcp air compressor
- Shut off the air compressor manually
- Accurate data reading
- Built in oil-water separator
TXED012 pcp air compressor
- Shut off the air compressorautomatically
- Adjustable pressure gauge,it will auto stop when it reaches the pressure you set
- Built in oil-water separator
TXED013 pcp air compressor
- Shut off automatically when it reaches the air compressor you set and auto purge at the same time
- Adjustable pressure gauge
- Auto purge valve
- Built in oil-water separator
Double cylinder head with good cooling design
- Approximate fill times :
- 0.5L tank from 0 to 4500psi in 3 minutes;
- 6.8L tank from 0 to 4500psi in 45 minutes.
Fan cooling system
- Better cooling effect
- Reasonable size design
- Fast heat dissipation
- Long time continuous working durable
Waterproof copper motor
- The motor is made of copper wire line, which is resistant to high temperature,fast heat dissipation
After receiving the compressor, please note the following:
- 1. Please check whether the outer packaging and the machine are damaged;
- 2. The compressor temperature should not exceed 85℃ or the running time does not exceed 45 minutes;
- 3. Do remember put on the breathing rods the replace the oil cap , then add oil to the leval of the red dot;
- 4. The compressor will install one filter along with the filling hose in order to make good air quality.
- 5. When connecting the filter and hose, please make sure that the blue filter and hose have been assembled and there is no leakage;
- 6. Due to transportation restrictions, the compressor does not come with silicone oil, so buyers need to prepare silicone oil by themselves
- 7.The filling pressure does not exceed 300Bar/4500PSI/30MPA
Dario
Reviewed in Belgium on December 18, 2024
à l'air bien construit, utilisé 1 fois à fonctionné parfaitement, mais vibre ( bouge beaucoup) reste à voir sur la durée.
Chris
Reviewed in the United Kingdom on April 11, 2022
Arrive 2 week earlier than expected, packageing and contents perfect. Had to go on youtube to assemble the manual isnt quite enough. Ive topped up 2, 12ltr cylinders from 200 bar to 300 in around 10-15 mins. Altho there is a 15 bar differance between compressor dile and the ones on my dive bottles. So my dive bottles read 285bar. Very happy with the product, tuxing company, and coms where A1. I would recamend this unit to anyone whos fed up of driveing to there local dive center.
Old Man
Reviewed in the United States on December 27, 2021
Compressor runs and performs flawlessly also pretty quiet. Phil scuba tank no problem 80 ft.³ very nice !!!
Recommended Products