Your cart is empty.
Your cart is empty.Specification: AC 250V Current rerating for different loads Inductive Load: 7.7A Lamp Load: 3.8A Motor Load: 4.4A Capacitive Load: 3.8A AC125V Current rerating for different loads Inductive Load: 7A Lamp Load: 3.6A Motor Load: 4A Capacitive Load: 3.6A Note, product upgrade, the rated current is change from 22A to 16A, you may receive the old model 22A or new model 16A Very Important Notice: Ratings on the switch label are only for Purely Resistive AC load, for other types of loads please refer to the ratings above. DC load Current ratings are much lower than AC load, if you need to use this switch with more than 0.5A DC load, contact us for compatibility at first.
K. Demsky
Reviewed in the United States on January 28, 2020
5 star, but realize these are tiny rockersDimensions are provided.Overall Size: 21 x 9.5 x 28mm (L*W*H)
Reed J
Reviewed in the United States on September 21, 2019
Used these to short some resistors in a current limiter circuit to allow me to bypass the current limiting resistors. They worked well and mounted cleanly into a 3D printed enclosure. Because the mounting hole was 3D printed, I wasn't concerned about any size discrepancies.
Sebastian Hahn
Reviewed in the United States on July 9, 2019
Needed a replacement switch for an old handheld 12v light. The original switch was a slide switch, but I couldn't find an adequate replacement. I found this rocker switch and was skeptical that it would be small enough; but with very little modification to the light, the toggle is a perfect fit; and I actually like it more than the old slide style switch (which was broken, btw, hence the need to replace it at all).
Muhammad Ali
Reviewed in the United States on May 23, 2018
Not I want
Ron Atkinson
Reviewed in the United States on March 2, 2018
As description. Will purchase again
Robert A. Post
Reviewed in Canada on December 7, 2018
Works well as a replacement on/off switch for old Hoover vacuum. Just a tad narrow, but I fixed the gap with clear silicone. I'll keep the extra four switches for future projects.
Jason
Reviewed in Canada on March 13, 2017
Product is as shown. Works fine for 12v applications. Installed 4 and they are still working 4 months later.
Recommended Products
