Your cart is empty.
Your cart is empty.This unit offers a complete siding mounting kit for smooth, vertical mounting of light fixtures on all siding types. The built-in electrical box design endures a UL listed installation every time plus the kit is easy to install. Kit includes mounting block with built-in electrical box, nm cable connector, and 4 screws fast and easy to install after siding is up textured, paintable surface built-in electrical box design ensures UL listed installation0.25" and 0.3" siding & shingles
Gordon Engley
August 5, 2025
This made an outdoor light installation a breeze. Looks really good.
muk muk
August 1, 2025
I had to mount two sensor lights for the backyard. It is an old house, and there is no backyard lighting at all. It is a new installation. I had to run wires from the electrical box in the basement, up to the attic, then out to the back of the house. The Arlington Vertical Siding Lamp Mounting Kit made my life so much easier, without the need of opening up a big hole on the siding for a electrical box. All I needed was to drill a small hole on the siding for the electrical wire to come through from the attic. The assembly is plastic, and made both electrical and weather insulation worry-free. And it keeps the sensor light in upright position. My sidings are 1/2" deep. It is important to order the proper one. The assembly comes with a simple instruction. My suggestion to Arlington is: please make use of the instruction sheet by printing a drilling template for the mounting holes and the wire feed-through holes on it. It would help taking the guess work out. That was what I had done when I mounted the two fixtures. Cost-wise, it is a bit expensive, but it does make the installation nice and neat!
zsikli
July 19, 2025
trusted brand. not sure if its any better than the slightly more affordable competition. fits ok to my vinyl siding. they have clear documentation as to which sizes they have and its easy to match the correct size to your siding. has a small weep channel in the bottom. instructions could be a bit better for the inexperienced. this is a small mount, i installed a small floodlight off amazon. the only issue i found is that the included grounding plate that would ground any metal mounting bracket your fixture might use increased the perimeter profile by several mm, which may allow for water penetration. there's several ways around this like caulk or better yet, removing it and grounding your metal bracket another way. its a bit disappointing that Arlington's solution doesn't just work seamlessly. note this is the small mount, so there's not really much space, your fixture is likely going to be pressed against their grounding bracket. on a larger mount with a larger fixture this is probably not an issue.
OzCan83
July 14, 2025
Fantastic device. Allowed me to setup wired security camera above my garage without installing a big ugly box. All I needed to do was drill a 1/2” hole through the wall to feed the wires, feed through the box, attach the box, and attach the camera. Done. Honestly took about 10 minutes to get everything done and looks great - fantastic device.
nematocyst
July 13, 2025
We bought these for our renovation project and our previous homeowner mounted lights directly to the angled vinyl plates so they were all crooked. These easily fixed the problem and the plates can be easily spray painted to match the wall color
Bill Settle
June 25, 2025
Ensure you order the model specific to your siding. I used this in conjunction with a security light, it saved an incredible amount of work, fit was very good and install was straightforward. I read the reviews regarding the price but I was ok with that compared to the effort it would have otherwise taken me to mount a typical junction box
Warren Ferguson
June 2, 2025
When I originally bought my Philips Hue fixture it was disappointing how bad the fitment was and no amount of caulking was going to make it sit right. Was very happy to find there is a better solution and it was a perfect fit for my old siding. I've seen a couple reviews that mentioned there was a gap but I've taken my pictures before applying the caulking to show how perfect it fit for my application. The only thing I will say is that with this bracket you're going to need some long screws to make it mount to the electrical box and still keep your sanity, ended up using some wood screws and that did the trick.
Danielle Crowell
April 18, 2025
Fits perfect
Moses Lee
April 6, 2025
The original owners of our house didn't bother with an electrical box for wiring the patio light fixture. I wanted to avoid cutting into the siding and this mounting box was the perfect fit for our needs. It is a hefty, densely solid piece of plastic that appears to be well-built to weather the elements. It will not fit every type of siding perfectly, so there will always be some gap that needs to be filled in with caulking, but it was a relatively easy job. There is plenty of room in the box for the wiring and wire nuts.I could not find this type of product in any hardware store I visited and I was glad that Amazon shipped this to my location. I am happy with this purchase and will gladly recommend it to anyone who is looking for an ad hoc solution for their lighting needs.
Diego sandoval
February 21, 2025
An excellent product I recommend For homes
Turk5392
December 31, 2024
This mount is great for installing on existing vinyl siding. My old light did not have an box and was just simply screwed into the siding with the wires coming from the wall. This fit the siding well with only a thin gap that I used to caulking for. It is sturdy and allows the light to be square to the house using the box built in the mount to store the wires and create a sturdy mount. Highly recommend this product.
Richard
November 24, 2024
Generally speaking, these are probably the best solution to having to mount something on siding. I had a light that I spent an hour cutting the hole out to mount a light. I found these on Amazon, and BAM! no more having to cut siding to mount lights. Since I am in the process of replacing all exterior lights I plan to buy more. I would have given the item 5 stars, but the plastic seems like it will easily break so great care has to be taken to insure it wont break and the mounting holes do not allow for any variation. Since I am using these over old holes I had to screw through the plastic to make it work. Additionally, the opening is about 1/8 of an inch too big. The lights I have were just barely big enough to cover the opening.
Matt Wilson
November 19, 2024
Worked great! I didn't use the little black plastic wire holder.
Recommended Products
