Your cart is empty.
Your cart is empty.The Ranco ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available. Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 Degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. The ETC line includes both one and two stage models. On two stage controls, each stage can be set independently thus eliminating the bothersome task of calculating interstage temperatures. And two stage models can be set up with overlapping heating or cooling stages. The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Every ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is. The ETC also has a keypad lockout switch to prevent tampering with the control settings by unauthorized personnel. The ETC display temperature may not be calibrated in the field.
Francis Mongeon
July 19, 2025
Perfect and quick just what I ordered thanks
SteveO
June 9, 2025
Controlling temperature for beer fermentors
VFS
March 8, 2025
easy to replace
Sean
February 27, 2025
I was looking to have better control over my old hot water heat exchanger tank which is controlled by a 24vac zone valve. This is powered by the system well, and provides great control. The connections for the output; the instructions didn't provide for a basic open/close circuit but it works perfectly by using 2 of the 3 outputs. Wire is very long which is great.
Engineer
February 2, 2025
Started randomly turning on at different differentials after a few days. Poor quality control. Do yourself a favor and buy the Johnson Controls equivalent.
BarryT
January 22, 2025
Worked perfect and easy to set or change functions.
Dj
December 10, 2024
We use these to control the temperature in poultry houses ...this is my second time ordering ...and will continue if need any more replaced
Recommended Products
$106.70
$ 51 .11 $51.11
$44.19
$ 17 .99 $17.99