Shopping Cart

Your cart is empty.

Your cart is empty.

YukiHalu USB Powered Aquarium Heater, 10W Adjustable Mini Fish Tank Heater with External Temperature Controller, LED Display, Used for 0.5-1 Gallon Tank (10W USB Adapter)

Free shipping on orders over $29.99

$21.59

$ 11 .51 $11.51

In Stock
  • Super Mini Size: YukiHalu 10W aquarium heater is designed for the mini fish tanks less than 1 gallon. Compact design, take less space and easy to hide in the fish tank. Temperature can be accurately adjusted from 64 to 93°F
  • Powered by USB 5V/2A. Insufficient power of the adapter will cause no heating and the number will flash or the controller restarts repeatedly, make sure the power adapter is 5V 2A and has enough power
  • Automatic Constant Temperature: Thanks to advanced Intelligent Frequency Conversion Technology, the water temperature can be kept constant with an accuracy of 1℉. The heater's working frequency will be changed according to temperature variation, and the heating is automatically stopped when the set temperature is reached
  • Overheating Protection: The power will be cut off and stop heating automatically if the heater overheating. Protect your fish. Never cook your fish. USB 5V power supply, prevent electric shock
  • Use external temperature controller to set the temperature instead of immersing your hands in water to rotate the dial. Never wet your hands or contaminating your tank
  • Settings Can be Memorised: The heater will remember the temperature setting, no need to reset the temperature after power off


CAUTIONS
1, The device must be used under rated voltage 5V=2A(10W), insufficient power of the adapter will cause no heating. Make sure the adapter has enough power.
2, The heater must be fully submersed into the water. The external temperature controller must be kept away from the water as it is not waterproof.
3, Disconnect power adapter and wait for 15 minutes before changing water or remove heater.
4, Place the heater in the way of water flow and don't bury it.

Products Highlight
1, Small size. It's perfect for a super mini fish tank (under 1 gallon)
2, Easy to set temperature. External temperature controller
3, Easy to read. Dual built-in temperature sensor. Digital LED display
4, High accuracy up to 1℉ thanks to advanced Intelligent Frequency Conversion Technology
5, Safety, 5V DC voltage, safety adapter include, and overheating protection never cook the fish.
6, Suitable for saltwater and freshwater

Error codes
H1: Overheating protection, stop heating automatically.
other codes: replace a new kit.

Indicator lights
Green: Constant Temperature
Red: heating

Parameters
Voltage: 5V=2A(10W)
Power: 10 Watts
Cord length:4.2Ft
Aquarium Volume: below1 Gallon
Temperature Range: 18~34 °C / 64~93 ℉
Temperature Accuracy: 0.5 °C / 1 ℉
Controller:External Controller(Not waterproof)
Packaging: 1×heater with external controller, 1×user manual, 1x suction cup, 1x usb adapter


Customer
Reviewed in Australia on May 16, 2025
Better than I expected, remembers it's last setting if powered down and can be switched between Fahrenheit or Celsius.Stays within 1 degree of the setpoint when tested against a very accurate temperature sensor and I bought 2 and both are similar.Checked them with a thermal camera for any concerning hot spots in the plug wiring or control box and no concerns there.Only drawback I found is the temperature readouts will not be accurate when actively heating as the temperature sensor sits on the element.
Madpanther
Reviewed in Australia on May 30, 2024
Good for small tank.
Laurence
Reviewed in Australia on April 8, 2024
Love the tiny size, it fit perfectly.
Ca
Reviewed in Australia on June 11, 2023
Don't work properly. One minute is cold and another heat a lot. Don't buy it if you love your fish
Peta
Reviewed in Australia on May 28, 2023
Good size for a fish bowl. The adapter isn't suitable for Australian outlets. If starting a new tank, put very warm water in and will heat quicker
Recommended Products