Shopping Cart

Your cart is empty.

Your cart is empty.

Dernord Stainless Steel Heating Element Submersible Water Heater Element 24v 900w

Free shipping on orders over $29.99

$57.03

$ 24 .47 $24.47

In Stock

About this item

  • 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
  • 1" NPSM flange fits USA standard water tank or your own custom heater tank
  • UL and cUL listed to the safety standards
  • Stainless steel surface has electropolish
  • Supplied with silicon sealing washer which is flexible and waterproof



Product Features

24V 900W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank

Product Application

→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc

→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months

NOTES

If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.

If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.

Technical Details

Voltage:24 volts

Wattage:900 watts

Item Weight:8.15ounces

Product Diameter: 8mm

: Tube length: 175mm

Screw Type:1”NPSM

Color:White


Customer
Reviewed in Canada on January 27, 2023
perfect
Kindle Customer
Reviewed in the United States on December 22, 2022
I purchased this to make a sand battery. This is hooked directly to a solar panel and then ot is used to heat sand. Works precisely as I expected.
LG
Reviewed in the United States on October 6, 2022
This was used for solar direct water heating using a 144 half cell solar panel and it worked great!
Ninja Bryan
Reviewed in the United States on April 5, 2022
Works great, but runs very hot. The tiny bolts are hard to connect to. The wire casing melted. I thought it was the wire size so I up sized it and the coating melted. Needs high temperature wire.
Oregonian
Reviewed in the United States on August 3, 2018
Works great in my solar dump load. On a sunny summer day I can keep a 20 gallon hot water heater hot with my surplus power off my 1.5kw array.
Larry Jaques
Reviewed in the United States on October 24, 2016
I haven't installed it yet, but I tested it when it came in. It warmed a 1G stainless bowl full of water by 20F in about 30 seconds. It looks well made and there is a nice thick silicone gasket to seal it in the bulkhead. Kudos, Denord!