Your cart is empty.
Your cart is empty.ISO 8846 MARINE and USCG Regulations for Ignition Protection. ISO 8849 MARINE Bilge Pump Standard
- Body Materials: Stainless steel
- Port Type: 3/4" (19mm)
- Voltage: 12 or 24 (Vdc)
- Motor Brush Life: 3500 (hrs)
- Duty Cycle: Continuously rated @ 20°C ambient, 20°C fluid temperature at 2.5 metres of water (0.25 bar)
Customer
Reviewed in the United States on April 4, 2025
I have been using these pumps for years since 2001 the last five years they have been nothing but crap. I’m lucky to get six months out of them. Time to switch.
Roundface
Reviewed in Canada on October 20, 2024
For those who are writing about the Cyclone not priming…This is a centrifugal pump that does not self prime. It will not draw water up to itself. It needs flooded suction. In addition, if you run it dry too long it will shut off. Jabsco takes safety seriously and installs thermal cut off protection in every pump. If you install it correctly - notably under the waterline so water can flow into it, it will deliver top notch performance.
Michael
Reviewed in the United States on October 17, 2024
Installed it in my boat to run the live wells. Used the same inlet as the previous unit. It kind of ran for a short time, 30 minutes, then wouldn’t pull water anymore. It is supposed to be able to prime up to 6.5’ so I placed it on a bucket full of water, wet the pump and it wouldn’t pull anything. I wanted too long to install it and now I can’t return it. Don’t make my mistake, just don’t buy it. Oh, there is a 3 year warranty that they don’t seem to want to honor through the manufacturer. It was quiet though, because it didn’t do anything.
Timothy Noble
Reviewed in the United States on September 7, 2023
This pump is on my livewell on my boat. It was a replacement in kind. And was delivered within two days of ordering and fit perfectly and work great.
Denise Shriver
Reviewed in the United States on August 30, 2013
We just replaced our old pump, which was about 10+ years old, with this High Flow pump. Wow, this little pump works really good at pushing the water through. What a difference it has made. It bolted right into the exsisting holes from the old one. I've read alot of reviews with people having problems with theirs, but for us, so far so good. If things change I'll let you know.
Oscar Shinn
Reviewed in the United States on June 29, 2011
Really a pretty good pump. No rust, high flow, quiet motor operation, smooth significant flow, low drain on the 12 volts batteries I use. The only problem I had is that this pump won't self prime. I had to go to Harbor Freight to buy another pump to put in series with this pump to get it started flowing each time I use the Jabsco pump. Once the water is flowing, the Jabsco pump works just fine and I turn off the primer pump. Priming the Jabsco takes some finesse. I use this pump to pump water and methanol out of 55 gallon drums. I use a hose with a gasoline type hand held valve to fill the other containers. This works great, with the exception of priming, or getting the water flowing initially. Once the flow starts, I can empty an entire 55 gallon drum in short order with very little battery drain. Real good product overall. Cheers
Recommended Products
